Products
COREF Co., Ltd.
Paints & Exterior Coats
ARTY ECO-PLASTER
ARTY ECO-PLASTER is a water-soluble eco-friendly functional paint that combines natural inorganic materials to meet the moisture absorption, adsorption, antibacterial, and anti-fungal functions among the recommended standards of Health-Friendly Housing Construction Standards (Ministry of Land, Infrastructure and Transport No. 2018-697).
Usage
Interior surfaces of concrete, cement, mortar, gypsum, CRC board, etc. (living room, bedroom, kitchen, etc.)
Properties
- Product Type : Inorganic Plaster
- Color : White
- Composition : 1 liquid type
- Solid content : 65% or more
- Specific gravity : 1.40 ± 0.15
- Dry film thickness : 500 μm
- Thinning (dilution rate) : Tap water, within 20% (when using an airless paint sprayer)
- Theoretical Quantity For Application : 0.94 ~ 1.18 kg/㎡
- Drying time (25℃): set to touch within 8 hours / dry-hard within 72 hours
- Shelf life: 6 months
- Packing unit: 20 kg / Plastic Pail
- Color : White
- Composition : 1 liquid type
- Solid content : 65% or more
- Specific gravity : 1.40 ± 0.15
- Dry film thickness : 500 μm
- Thinning (dilution rate) : Tap water, within 20% (when using an airless paint sprayer)
- Theoretical Quantity For Application : 0.94 ~ 1.18 kg/㎡
- Drying time (25℃): set to touch within 8 hours / dry-hard within 72 hours
- Shelf life: 6 months
- Packing unit: 20 kg / Plastic Pail
Application Method
- Surface Preparation: The surface shall be clean without oil, rust, dust, or dirt. Cracks or bumps should be filled with Arty cement mortar.
- Handle the work surface so that annealing wires, rebars, and wires are not exposed, and the cutting part of the wire should be painted with rust preventive primer to prevent rust.
- Paint : Dilute water to less than 20% of the paint and stir it, and paint on the concrete surface or gypsum board two to three times. Use the recommended tip (spray width 15.2 to 25.4 cm, tip size 017 to 023) when using the airless paint sprayer.
- Keep the remaining materials sealed and reused.
- Handle the work surface so that annealing wires, rebars, and wires are not exposed, and the cutting part of the wire should be painted with rust preventive primer to prevent rust.
- Paint : Dilute water to less than 20% of the paint and stir it, and paint on the concrete surface or gypsum board two to three times. Use the recommended tip (spray width 15.2 to 25.4 cm, tip size 017 to 023) when using the airless paint sprayer.
- Keep the remaining materials sealed and reused.
Precautions
- Do not mix with other paints.
- Avoid painting on rainy days, humid days (over 85%), and days with low temperatures (below 5°C).
- Wood, steel, glass surfaces, plastics, PF boards, Isopink boards and oil paint areas are not allowed to be painted due to poor adhesion.
- Do not freeze the product, keep it indoors (storage temperature 5~35℃) avoiding fire and direct sunlight, and store it unopened facing the top.
- Store the remaining product after use without cement mixing in the same way.
- Dispose of waste paint through a waste disposal company designated by the Ministry of Environment.
- Use the product within the storage period (marked on the label).
- Avoid painting on rainy days, humid days (over 85%), and days with low temperatures (below 5°C).
- Wood, steel, glass surfaces, plastics, PF boards, Isopink boards and oil paint areas are not allowed to be painted due to poor adhesion.
- Do not freeze the product, keep it indoors (storage temperature 5~35℃) avoiding fire and direct sunlight, and store it unopened facing the top.
- Store the remaining product after use without cement mixing in the same way.
- Dispose of waste paint through a waste disposal company designated by the Ministry of Environment.
- Use the product within the storage period (marked on the label).