Products
COREF Co., Ltd.
Paints & Exterior Coats
ARTY GRANULE
ARTY GRANULE is an excellent non-combustible finish coat(quasi-non-combustible) as a sand faced finish using water-soluble acrylic polymers and inorganic natural materials.
It is a product that exhibits a high-quality European-style look using various finishing methods with high-quality outer wall texture, and can create various colors and natural patterns with a uniform embossed texture.
It is a product that exhibits a high-quality European-style look using various finishing methods with high-quality outer wall texture, and can create various colors and natural patterns with a uniform embossed texture.
Usage
External finishing materials requiring pollution resistance, durability, and weather resistance of concrete and cement surfaces.
Luxury villas, houses, consignment facilities, public facilities, etc
Luxury villas, houses, consignment facilities, public facilities, etc
Properties
- Color : 50 Colors and Custom Colors
- Viscosity : 30,000 ± 5,000
- Specific gravity : 1.75 ± 0.05
- Theoretical Quantity For Application : 2 - 2.5 kg/㎡ (The amount required varies depending on the shape and pattern)
- Shelf life : 6 months (Indoor storage at 5-35℃ unopened)
- Packing unit : 24 kg / Plastic Pail
- Viscosity : 30,000 ± 5,000
- Specific gravity : 1.75 ± 0.05
- Theoretical Quantity For Application : 2 - 2.5 kg/㎡ (The amount required varies depending on the shape and pattern)
- Shelf life : 6 months (Indoor storage at 5-35℃ unopened)
- Packing unit : 24 kg / Plastic Pail
Application Method
- Work surface preparation: Mesh finish on concrete or insulation board surfaces and flatten the bumps or mesh projections with an Arty Cement Mortar.
- Work surface curing: Curing the work surface sufficiently for 2 to 3 days.
- When requesting wall joint pattern, determine the width and install it in advance with an ink line.
- Before Plastering work the Arty Granule, Mix it using an electric-mixer, and if necessary, add water within 2%.
- If Arty Granule is colorless, put an ink can in it, but wash it with a small amount of water so that there is no ink left in the ink can, and then use an electric-mixer to mix it.
- Apply it flat within 1.5 to 2mm using a trowel, and after 2-3 minutes, rub it left and right or up and down with a rough trowel to form a pattern.
- Work surface curing: Curing the work surface sufficiently for 2 to 3 days.
- When requesting wall joint pattern, determine the width and install it in advance with an ink line.
- Before Plastering work the Arty Granule, Mix it using an electric-mixer, and if necessary, add water within 2%.
- If Arty Granule is colorless, put an ink can in it, but wash it with a small amount of water so that there is no ink left in the ink can, and then use an electric-mixer to mix it.
- Apply it flat within 1.5 to 2mm using a trowel, and after 2-3 minutes, rub it left and right or up and down with a rough trowel to form a pattern.
Precautions
- Be careful when the outside temperature drops below 5°C during painting or before complete drying after painting, which may cause problems with coating and adhesion.
- During construction, work at temperatures between 5°C and 35°C and 85% humidity or lower.
- The working surface shall be protected from damage caused by weather conditions such as rain, snow, etc. and impact for at least 48 hours after finishing.
- Do not mix with other paints.
- Store at room temperature (5-35℃) because freezing the product will cause defects in the coating.
- Even if it is a product of the same product, color, and LOT, the appearance may vary depending on the dilution ratio, painting equipment, and painting method, so paint with the same LOT product, painting equipment, and method as much as possible.
- Dispose of waste paint through a waste disposal company designated by the Ministry of Environment.
- Use the product within the storage period (marked on the label).
- During construction, work at temperatures between 5°C and 35°C and 85% humidity or lower.
- The working surface shall be protected from damage caused by weather conditions such as rain, snow, etc. and impact for at least 48 hours after finishing.
- Do not mix with other paints.
- Store at room temperature (5-35℃) because freezing the product will cause defects in the coating.
- Even if it is a product of the same product, color, and LOT, the appearance may vary depending on the dilution ratio, painting equipment, and painting method, so paint with the same LOT product, painting equipment, and method as much as possible.
- Dispose of waste paint through a waste disposal company designated by the Ministry of Environment.
- Use the product within the storage period (marked on the label).
Construction example
Color Charts
