Products
COREF Co., Ltd.
Paints & Exterior Coats
ARTY CEMENT VINTAGE (FLOOR)
ARTY CEMENT VINTAGE(FLOOR) is an inorganic self-leveling eco-friendly finishing material, a one-liquid type water-soluble interior flooring material that is used by mixing powder and water.
It is an eco-friendly product that can express various textures (vintage, natural cracks on the surface, etc.) depending on the construction surface treatment method.
It is an eco-friendly product that can express various textures (vintage, natural cracks on the surface, etc.) depending on the construction surface treatment method.
Usage
For interior floor of hotels, cafes, department store, exhibition halls, office buildings, etc
Properties
- Finish : Matt Gray
- Composition : Powder type
- Number of coats of paint : 1 time
- Painting equipment : trowel, exclusive paint squeegee
- Dry film thickness : 3 mm
- Theoretical Quantity For Application : 5.8 kg/㎡
- Thinning (dilution rate) : Powder 5.5 : Water 1
- Pot Life (25℃) : 5 minutes (Use immediately after mixing)
- Drying time (25℃) : 48 hours (dry-through)
- Shelf life : 6 months
- Packing unit : 20 kg / Plastic Pail
- Composition : Powder type
- Number of coats of paint : 1 time
- Painting equipment : trowel, exclusive paint squeegee
- Dry film thickness : 3 mm
- Theoretical Quantity For Application : 5.8 kg/㎡
- Thinning (dilution rate) : Powder 5.5 : Water 1
- Pot Life (25℃) : 5 minutes (Use immediately after mixing)
- Drying time (25℃) : 48 hours (dry-through)
- Shelf life : 6 months
- Packing unit : 20 kg / Plastic Pail
Application Method
■ Surface Preparation
- Dry the surface to be painted sufficiently. (Curing at least 80% relative humidity based on 25℃ for 28 days)
- Completely remove any other contaminants from the working surface, such as Laitance, dirt, and oil. (Sandblasting, DIAMOND WHEEL GRINDING, 10% HCL acid cleaning, etc.)
- In the case of High-strength concrete (260 kgf/㎠ or higher) may cause poor adhesion during grinding, so perform surface treatment using blasting method and check adhesion performance.
- The appropriate pH value for the painting surface is 7 to 9.(Equilibrium moisture content of 6% or less)
- Fill gaps, grooves, cracks, etc. with Arty cement mortar after V-CUTTING, grind, and paint after surface treatment. (Caution_The putty coating may look see-through and discoloration may occur when applying cement vintage after painting with epoxy putty.)
- V-CUTTING the edge of the wall, etc.
- Prevent contamination of areas that are not painted with masking tape.
■ Product use and Application
- Do not heat the product or mix it with other paints.
- Please keep the time recommended by our company for re-painting intervals when working.
- Consider that the actual consumption requirement may vary depending on the surface condition, painting method, and painting conditions.
- When applying repair paint on the preceding coating and the old coating film, apply a test coating in advance and check that there are no abnormalities (adhesive force, etc.) before working.
- If necessary, epoxy primer must be painted and the Arty cement vintage(For floor) must be painted to prevent air bubbles on the base surface.
- There is a risk of bubbles during painting, so paint the primer carefully so that there are no loose parts.
- Add water (3.6 kg) to the marked scale in the Arty cement vintage(For floor) Pail, then add powder little by little while mixing with an electric mixer. Mix it evenly for 2 to 3 minutes. (Use 1000 rpm, 300 W or more for electric mixer)
- When mixing paint, make sure to use an electric mixer and mix at a speed ranging from 300 to 500 rpm to minimize the generation of bubbles.
- Mix water and powder and use immediately within 5 minutes as possible.
- Excessive dilution of water may cause deterioration of strength and poor surface conditions, so dilute water as appropriate.
- At least 48 hours after painting the Arty cement vintage(For floor), completely cured and paint the top with epoxy transparent coating.
- Dry the surface to be painted sufficiently. (Curing at least 80% relative humidity based on 25℃ for 28 days)
- Completely remove any other contaminants from the working surface, such as Laitance, dirt, and oil. (Sandblasting, DIAMOND WHEEL GRINDING, 10% HCL acid cleaning, etc.)
- In the case of High-strength concrete (260 kgf/㎠ or higher) may cause poor adhesion during grinding, so perform surface treatment using blasting method and check adhesion performance.
- The appropriate pH value for the painting surface is 7 to 9.(Equilibrium moisture content of 6% or less)
- Fill gaps, grooves, cracks, etc. with Arty cement mortar after V-CUTTING, grind, and paint after surface treatment. (Caution_The putty coating may look see-through and discoloration may occur when applying cement vintage after painting with epoxy putty.)
- V-CUTTING the edge of the wall, etc.
- Prevent contamination of areas that are not painted with masking tape.
■ Product use and Application
- Do not heat the product or mix it with other paints.
- Please keep the time recommended by our company for re-painting intervals when working.
- Consider that the actual consumption requirement may vary depending on the surface condition, painting method, and painting conditions.
- When applying repair paint on the preceding coating and the old coating film, apply a test coating in advance and check that there are no abnormalities (adhesive force, etc.) before working.
- If necessary, epoxy primer must be painted and the Arty cement vintage(For floor) must be painted to prevent air bubbles on the base surface.
- There is a risk of bubbles during painting, so paint the primer carefully so that there are no loose parts.
- Add water (3.6 kg) to the marked scale in the Arty cement vintage(For floor) Pail, then add powder little by little while mixing with an electric mixer. Mix it evenly for 2 to 3 minutes. (Use 1000 rpm, 300 W or more for electric mixer)
- When mixing paint, make sure to use an electric mixer and mix at a speed ranging from 300 to 500 rpm to minimize the generation of bubbles.
- Mix water and powder and use immediately within 5 minutes as possible.
- Excessive dilution of water may cause deterioration of strength and poor surface conditions, so dilute water as appropriate.
- At least 48 hours after painting the Arty cement vintage(For floor), completely cured and paint the top with epoxy transparent coating.
Precautions
- Do not use it for anything other than its intended use.
- Do not mix with other paints.
- When transporting or storing, keep it indoors (storage temperature 5~35℃) avoiding fire and direct sunlight, and store it unopened facing the top.
- Avoid painting on rainy days, humid days (over 85%), and days with low temperatures (below 5°C).
- Dispose of waste paint through a waste disposal company designated by the Ministry of Environment.
- Use the product within the storage period (marked on the label).
- Do not mix with other paints.
- When transporting or storing, keep it indoors (storage temperature 5~35℃) avoiding fire and direct sunlight, and store it unopened facing the top.
- Avoid painting on rainy days, humid days (over 85%), and days with low temperatures (below 5°C).
- Dispose of waste paint through a waste disposal company designated by the Ministry of Environment.
- Use the product within the storage period (marked on the label).